✏️ Fix stepper MS pin typos (MarlinFirmware#26891)

Author: hm2dev

Marlin/src/module/stepper.cpp

@@ -4118,22 +4118,22 @@ void Stepper::report_positions() {
           break;
       #endif
       #if HAS_I_MS_PINS
-        case  I_AXIS: WRITE(I_MS1_PIN, ms1); break
+        case  I_AXIS: WRITE(I_MS1_PIN, ms1); break;
       #endif
       #if HAS_J_MS_PINS
-        case  J_AXIS: WRITE(J_MS1_PIN, ms1); break
+        case  J_AXIS: WRITE(J_MS1_PIN, ms1); break;
       #endif
       #if HAS_K_MS_PINS
-        case  K_AXIS: WRITE(K_MS1_PIN, ms1); break
+        case  K_AXIS: WRITE(K_MS1_PIN, ms1); break;
       #endif
       #if HAS_U_MS_PINS
-        case  U_AXIS: WRITE(U_MS1_PIN, ms1); break
+        case  U_AXIS: WRITE(U_MS1_PIN, ms1); break;
       #endif
       #if HAS_V_MS_PINS
-        case  V_AXIS: WRITE(V_MS1_PIN, ms1); break
+        case  V_AXIS: WRITE(V_MS1_PIN, ms1); break;
       #endif
       #if HAS_W_MS_PINS
-        case  W_AXIS: WRITE(W_MS1_PIN, ms1); break
+        case  W_AXIS: WRITE(W_MS1_PIN, ms1); break;
       #endif
       #if HAS_E0_MS_PINS
         case  E_AXIS: WRITE(E0_MS1_PIN, ms1); break;
@@ -4198,22 +4198,22 @@ void Stepper::report_positions() {
           break;
       #endif
       #if HAS_I_MS_PINS
-        case  I_AXIS: WRITE(I_MS2_PIN, ms2); break
+        case  I_AXIS: WRITE(I_MS2_PIN, ms2); break;
       #endif
       #if HAS_J_MS_PINS
-        case  J_AXIS: WRITE(J_MS2_PIN, ms2); break
+        case  J_AXIS: WRITE(J_MS2_PIN, ms2); break;
       #endif
       #if HAS_K_MS_PINS
-        case  K_AXIS: WRITE(K_MS2_PIN, ms2); break
+        case  K_AXIS: WRITE(K_MS2_PIN, ms2); break;
       #endif
       #if HAS_U_MS_PINS
-        case  U_AXIS: WRITE(U_MS2_PIN, ms2); break
+        case  U_AXIS: WRITE(U_MS2_PIN, ms2); break;
       #endif
       #if HAS_V_MS_PINS
-        case  V_AXIS: WRITE(V_MS2_PIN, ms2); break
+        case  V_AXIS: WRITE(V_MS2_PIN, ms2); break;
       #endif
       #if HAS_W_MS_PINS
-        case  W_AXIS: WRITE(W_MS2_PIN, ms2); break
+        case  W_AXIS: WRITE(W_MS2_PIN, ms2); break;
       #endif
       #if HAS_E0_MS_PINS
         case  E_AXIS: WRITE(E0_MS2_PIN, ms2); break;
@@ -4277,23 +4277,23 @@ void Stepper::report_positions() {
           #endif
           break;
       #endif
-      #if HAS_I_MS_PINS
-        case  I_AXIS: WRITE(I_MS3_PIN, ms3); break
+      #if HAS_I_MS_PINS && PIN_EXISTS(I_MS3)
+        case  I_AXIS: WRITE(I_MS3_PIN, ms3); break;
       #endif
-      #if HAS_J_MS_PINS
-        case  J_AXIS: WRITE(J_MS3_PIN, ms3); break
+      #if HAS_J_MS_PINS && PIN_EXISTS(J_MS3)
+        case  J_AXIS: WRITE(J_MS3_PIN, ms3); break;
       #endif
-      #if HAS_K_MS_PINS
-        case  K_AXIS: WRITE(K_MS3_PIN, ms3); break
+      #if HAS_K_MS_PINS && PIN_EXISTS(K_MS3)
+        case  K_AXIS: WRITE(K_MS3_PIN, ms3); break;
       #endif
-      #if HAS_U_MS_PINS
-        case  U_AXIS: WRITE(U_MS3_PIN, ms3); break
+      #if HAS_U_MS_PINS && PIN_EXISTS(U_MS3)
+        case  U_AXIS: WRITE(U_MS3_PIN, ms3); break;
       #endif
-      #if HAS_V_MS_PINS
-        case  V_AXIS: WRITE(V_MS3_PIN, ms3); break
+      #if HAS_V_MS_PINS && PIN_EXISTS(V_MS3)
+        case  V_AXIS: WRITE(V_MS3_PIN, ms3); break;
       #endif
-      #if HAS_W_MS_PINS
-        case  W_AXIS: WRITE(W_MS3_PIN, ms3); break
+      #if HAS_W_MS_PINS && PIN_EXISTS(W_MS3)
+        case  W_AXIS: WRITE(W_MS3_PIN, ms3); break;
       #endif
       #if HAS_E0_MS_PINS && PIN_EXISTS(E0_MS3)
         case  E_AXIS: WRITE(E0_MS3_PIN, ms3); break;