Skip to content

Commit 49b3afa

Browse files
thinkyheadfeldi12
thinkyhead
and
feldi12
committed
🔧 Increase PID_FUNCTIONAL_RANGE
MarlinFirmware/Marlin#27740 Co-Authored-By: feldi12 <[email protected]>
1 parent 5d9d61c commit 49b3afa

File tree

358 files changed

+358
-358
lines changed

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

358 files changed

+358
-358
lines changed

‎config/default/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -904,7 +904,7 @@
904904
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
905905
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
906906
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
907-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
907+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
908908
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
909909

910910
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

‎config/examples/3DFabXYZ/Migbot/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -906,7 +906,7 @@
906906
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
907907
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
908908
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
909-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
909+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
910910
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
911911

912912
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

‎config/examples/3DMatik/XL/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -904,7 +904,7 @@
904904
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
905905
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
906906
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
907-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
907+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
908908
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
909909

910910
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

‎config/examples/ADIMLab/Gantry v1/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -904,7 +904,7 @@
904904
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
905905
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
906906
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
907-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
907+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
908908
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
909909

910910
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

‎config/examples/ADIMLab/Gantry v2/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -904,7 +904,7 @@
904904
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
905905
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
906906
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
907-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
907+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
908908
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
909909

910910
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

‎config/examples/Alfawise/U20-bltouch/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -973,7 +973,7 @@
973973
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
974974
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
975975
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
976-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
976+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
977977
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
978978

979979
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

‎config/examples/Alfawise/U20/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -974,7 +974,7 @@
974974
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
975975
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
976976
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
977-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
977+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
978978
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
979979

980980
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

‎config/examples/AliExpress/CL-260/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -904,7 +904,7 @@
904904
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
905905
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
906906
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
907-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
907+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
908908
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
909909

910910
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

‎config/examples/AliExpress/UM2pExt/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -905,7 +905,7 @@
905905
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
906906
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
907907
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
908-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
908+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
909909
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
910910

911911
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

‎config/examples/Anet/A2/Configuration.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -904,7 +904,7 @@
904904
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
905905
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
906906
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
907-
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
907+
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
908908
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
909909

910910
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)

0 commit comments

Comments
 (0)