update headers

thinkyhead · thinkyhead · commit 72b3b25ba258 · 2024-07-13T23:37:52.000-05:00
diff --git a/Marlin/src/pins/ramps/pins_XTLW_MFF_V1.h b/Marlin/src/pins/ramps/pins_XTLW_MFF_V1.h
@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
diff --git a/Marlin/src/pins/ramps/pins_XTLW_MFF_V2.h b/Marlin/src/pins/ramps/pins_XTLW_MFF_V2.h
@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
diff --git a/Marlin/src/pins/stm32f4/pins_XTLW_CLIMBER_8TH.h b/Marlin/src/pins/stm32f4/pins_XTLW_CLIMBER_8TH.h
@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm

Original file line number	Diff line number	Diff line change
`@@ -1,6 +1,6 @@`
`1`	`1`	`/**`
`2`	`2`	`* Marlin 3D Printer Firmware`
`3`		`- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
	`3`	`+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
`4`	`4`	`*`
`5`	`5`	`* Based on Sprinter and grbl.`
`6`	`6`	`* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm`
`@@ -16,7 +16,7 @@`
`16`	`16`	`* GNU General Public License for more details.`
`17`	`17`	`*`
`18`	`18`	`* You should have received a copy of the GNU General Public License`
`19`		`- * along with this program. If not, see <http://www.gnu.org/licenses/>.`
	`19`	`+ * along with this program. If not, see <https://www.gnu.org/licenses/>.`
`20`	`20`	`*`
`21`	`21`	`*/`
`22`	`22`	`#pragma once`