🧑‍💻 Support files updates

Author: thinkyhead

.editorconfig

@@ -1,19 +1,29 @@
 # editorconfig.org
 root = true
 
+[*]
+trim_trailing_whitespace = true
+insert_final_newline = true
+
 [{*.patch,syntax_test_*}]
 trim_trailing_whitespace = false
 
+[{*.c,*.cpp,*.h,*.ino,*.py,Makefile}]
+end_of_line = lf
+
 [{*.c,*.cpp,*.h,*.ino}]
 charset = utf-8
-
-[{*.c,*.cpp,*.h,*.ino,Makefile}]
-trim_trailing_whitespace = true
-insert_final_newline = true
-end_of_line = lf
 indent_style = space
 indent_size = 2
 
+[{Makefile}]
+indent_style = tab
+indent_size = 2
+
+[*.md]
+# Two spaces at the end of the line means newline in Markdown
+trim_trailing_whitespace = false
+
 [{*.py}]
 indent_style = space
 indent_size = 4

.github/code_of_conduct.md

@@ -28,15 +28,9 @@ Project maintainers are responsible for clarifying the standards of acceptable b
 
 Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.
 
-## Scope
-
-This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
-
 ## Enforcement
 
-Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at [[email protected]](mailto:[email protected]). All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
-
-Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
+Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by following GitHub's [reporting abuse or spam article](https://docs.github.com/en/communities/maintaining-your-safety-on-github/reporting-abuse-or-spam). All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances.
 
 ## Attribution
 

.github/contributing.md

@@ -26,11 +26,12 @@ The following is a set of guidelines for contributing to Marlin, hosted by the [
 
 ## Code of Conduct
 
-This project and everyone participating in it is governed by the [Marlin Code of Conduct](code_of_conduct.md). By participating, you are expected to uphold this code. Please report unacceptable behavior to [[email protected]](mailto:marlinfirmware@github.com).
+This project and everyone participating in it is governed by the [Marlin Code of Conduct](code_of_conduct.md). By participating, you are expected to uphold this code. Please report unacceptable behavior by following GitHub's [reporting abuse or spam article](https://docs.github.com/en/communities/maintaining-your-safety-on-github/reporting-abuse-or-spam).
 
 ## I don't want to read this whole thing I just have a question!!!
 
-> **Note:** Please don't file an issue to ask a question. You'll get faster results by using the resources below.
+> [!NOTE]
+> Please don't file an issue to ask a question. You'll get faster results by using the resources below.
 
 We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
 
@@ -55,7 +56,8 @@ This section guides you through submitting a Bug Report for Marlin. Following th
 
 Before creating a Bug Report, please test the "nightly" development branch, as you might find out that you don't need to create one. When you are creating a Bug Report, please [include as many details as possible](#how-do-i-submit-a-good-bug-report). Fill out [the required template](ISSUE_TEMPLATE/bug_report.yml), the information it asks for helps us resolve issues faster.
 
-> **Note:** Regressions can happen. If you find a **Closed** issue that seems like your issue, go ahead and open a new issue and include a link to the original issue in the body of your new one. All you need to create a link is the issue number, preceded by #. For example, #8888.
+> [!NOTE]
+> Regressions can happen. If you find a **Closed** issue that seems like your issue, go ahead and open a new issue and include a link to the original issue in the body of your new one. All you need to create a link is the issue number, preceded by #. For example, #8888.
 
 #### How Do I Submit A (Good) Bug Report?
 

.gitignore

@@ -25,6 +25,9 @@ bdf2u8g.exe
 genpages.exe
 marlin_config.json
 mczip.h
+language*.csv
+out-csv/
+out-language/
 *.gen
 *.sublime-workspace
 
@@ -130,7 +133,9 @@ spi_flash.bin
 fs.img
 
 # CMake
+buildroot/share/cmake/*
 CMakeLists.txt
+!buildroot/share/cmake/CMakeLists.txt
 src/CMakeLists.txt
 CMakeListsPrivate.txt
 build/

.vscode/extensions.json

@@ -6,6 +6,7 @@
         "platformio.platformio-ide"
     ],
     "unwantedRecommendations": [
+        "ms-vscode-remote.remote-containers",
         "ms-vscode.cpptools-extension-pack"
     ]
 }

Makefile

@@ -5,6 +5,7 @@ CONTAINER_IMAGE := marlin-dev
 
 help:
 	@echo "Tasks for local development:"
+	@echo "* format-pins:                 Reformat all pins files
 	@echo "* tests-single-ci:             Run a single test from inside the CI"
 	@echo "* tests-single-local:          Run a single test locally"
 	@echo "* tests-single-local-docker:   Run a single test locally, using docker"
@@ -27,7 +28,7 @@ help:
 
 tests-single-ci:
 	export GIT_RESET_HARD=true
-	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET)
+	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) PLATFORMIO_BUILD_FLAGS=-DGITHUB_ACTION
 .PHONY: tests-single-ci
 
 tests-single-local:
@@ -57,3 +58,12 @@ tests-all-local-docker:
 setup-local-docker:
 	$(CONTAINER_RT_BIN) build -t $(CONTAINER_IMAGE) -f docker/Dockerfile .
 .PHONY: setup-local-docker
+
+PINS := $(shell find Marlin/src/pins -mindepth 2 -name '*.h')
+
+.PHONY: $(PINS)
+
+$(PINS): %:
+	@echo "Formatting $@" && node buildroot/share/scripts/pinsformat.js $@
+
+format-pins: $(PINS)

Marlin/Makefile

@@ -63,8 +63,8 @@ HARDWARE_MOTHERBOARD ?= 1020
 
 ifeq ($(OS),Windows_NT)
   # Windows
-  ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
-  ARDUINO_USER_DIR ?= ${HOME}/Arduino
+  ARDUINO_INSTALL_DIR ?= ${HOME}/AppData/Local/Arduino
+  ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
 else
   UNAME_S := $(shell uname -s)
   ifeq ($(UNAME_S),Linux)
@@ -82,11 +82,11 @@ endif
 
 # Arduino source install directory, and version number
 # On most linuxes this will be /usr/share/arduino
-ARDUINO_INSTALL_DIR  ?= ${HOME}/Arduino
-ARDUINO_VERSION      ?= 106
+ARDUINO_INSTALL_DIR  ?= ${HOME}/AppData/Local/Arduino       # C:/Users/${USERNAME}/AppData/Local/Arduino
+ARDUINO_VERSION      ?= 10819
 
 # The installed Libraries are in the User folder
-ARDUINO_USER_DIR ?= ${HOME}/Arduino
+ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
 
 # You can optionally set a path to the avr-gcc tools.
 # Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
@@ -656,18 +656,18 @@ ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino)
   # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
   # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/libraries/SPI/src
 endif
 
 ifeq ($(IS_MCU),1)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/cores/arduino
 
   # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
   # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/libraries/SPI/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/libraries/SoftwareSerial/src
 endif
 
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
@@ -681,17 +681,17 @@ ifeq ($(WIRE), 1)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
   # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/libraries/Wire/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/libraries/Wire/src/utility
 endif
 ifeq ($(NEOPIXEL), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
 endif
 ifeq ($(U8GLIB), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/csrc
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/cppsrc
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/fntsrc
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib-HAL
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib-HAL/src
+# VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
+# VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/src
 endif
 ifeq ($(TMC), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMCStepper/src
@@ -700,9 +700,9 @@ endif
 
 ifeq ($(HARDWARE_VARIANT), arduino)
   HARDWARE_SUB_VARIANT ?= mega
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/variants/$(HARDWARE_SUB_VARIANT)
 else ifeq ($(HARDWARE_VARIANT), Sanguino)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/variants/sanguino
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/variants/sanguino
 else ifeq ($(HARDWARE_VARIANT), archim)
   VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/libsam
   VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/CMSIS/CMSIS/Include/
@@ -718,7 +718,7 @@ else ifeq ($(HARDWARE_VARIANT), archim)
   LDLIBS   = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/libsam_sam3x8e_gcc_rel.a
 else
   HARDWARE_SUB_VARIANT ?= standard
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/variants/$(HARDWARE_SUB_VARIANT)
 endif
 
 LIB_SRC = wiring.c \
@@ -733,7 +733,7 @@ endif
 
 ifeq ($(HARDWARE_VARIANT), Teensy)
   LIB_SRC = wiring.c
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/teensy/cores/teensy
 endif
 
 LIB_CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp
@@ -880,7 +880,7 @@ AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i
 ifeq ($(shell uname -s), Linux)
   AVRDUDE_CONF = /etc/avrdude/avrdude.conf
 else
-  AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
+  AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf
 endif
 AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
   -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \

Marlin/Marlin.ino

@@ -2,7 +2,7 @@
 
   Marlin Firmware
 
-  (c) 2011-2020 MarlinFirmware
+  (c) 2011-2024 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 
@@ -27,7 +27,7 @@ Configuration
   - https://github.com/MarlinFirmware/Configurations
     Example configurations for several printer models.
 
-  - https://www.youtube.com/watch?v=3gwWVFtdg-4
+  - https://youtu.be/3gwWVFtdg-4
     A good 20-minute overview of Marlin configuration by Tom Sanladerer.
     (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
     Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin

Marlin/config.ini

@@ -3,10 +3,50 @@
 # config.ini - Options to apply before the build
 #
 [config:base]
+#
+# ini_use_config - A comma-separated list of actions to apply to the Configuration files.
+#                  The actions will be applied in the listed order.
+#  - none
+#    Ignore this file and don't apply any configuration options
+#
+#  - base
+#    Just apply the options in config:base to the configuration
+#
+#  - minimal
+#    Just apply the options in config:minimal to the configuration
+#
+#  - all
+#    Apply all 'config:*' sections in this file to the configuration
+#
+#  - another.ini
+#    Load another INI file with a path relative to this config.ini file (i.e., within Marlin/)
+#
+#  - https://me.myserver.com/path/to/configs
+#    Fetch configurations from any URL.
+#
+#  - example/Creality/Ender-5 Plus @ bugfix-2.1.x
+#    Fetch example configuration files from the MarlinFirmware/Configurations repository
+#    https://raw.githubusercontent.com/MarlinFirmware/Configurations/bugfix-2.1.x/config/examples/Creality/Ender-5%20Plus/
+#
+#  - example/default @ release-2.0.9.7
+#    Fetch default configuration files from the MarlinFirmware/Configurations repository
+#    https://raw.githubusercontent.com/MarlinFirmware/Configurations/release-2.0.9.7/config/default/
+#
+#  - [disable]
+#    Comment out all #defines in both Configuration.h and Configuration_adv.h. This is useful
+#    to start with a clean slate before applying any config: options, so only the options explicitly
+#    set in config.ini will be enabled in the configuration.
+#
+#  - [flatten] (Not yet implemented)
+#    Produce a flattened set of Configuration.h and Configuration_adv.h files with only the enabled
+#    #defines and no comments. A clean look, but context-free.
+#
 ini_use_config                           = none
 
 # Load all config: sections in this file
 ;ini_use_config                          = all
+# Disable everything and apply subsequent config:base options
+;ini_use_config                          = [disable], base
 # Load config file relative to Marlin/
 ;ini_use_config                          = another.ini
 # Download configurations from GitHub

buildroot/bin/build_example

@@ -32,6 +32,9 @@ $SED -i~ -e "20,30{/#error/d}" Marlin/Configuration.h
 rm Marlin/Configuration.h~
 unset IFS; set +f
 
+# Suppress fatal warnings
+echo -e "\n#define NO_CONTROLLER_CUSTOM_WIRING_WARNING" >> Marlin/Configuration.h
+
 echo "Building the firmware now..."
 $HERE/mftest -s -a -n1 || { echo "Failed"; exit 1; }