Merge pull request #5159 from esphome/bump-2025.7.3

2025.7.3

Author: jesserockz

Makefile

@@ -1,5 +1,5 @@
 ESPHOME_PATH = ../esphome
-ESPHOME_REF = 2025.7.2
+ESPHOME_REF = 2025.7.3
 PAGEFIND_VERSION=1.1.1
 PAGEFIND=pagefind
 NET_PAGEFIND=../pagefindbin/pagefind

_static/version

@@ -1 +1 @@
-2025.7.2
+2025.7.3

changelog/2025.7.0.rst

@@ -428,6 +428,24 @@ Release 2025.7.2 - July 19
     - [gpio] Disable interrupt mode by default for LibreTiny platforms :esphomepr:`9687` by :ghuser:`bdraco`
 
 
+Release 2025.7.3 - July 23
+--------------------------
+
+.. collapse:: Show
+    :open:
+
+    - [gpio] Auto-disable interrupts for shared GPIO pins in binary sensors :esphomepr:`9701` by :ghuser:`bdraco`
+    - Fix format string error in ota_web_server.cpp :esphomepr:`9711` by :ghuser:`tmpeh`
+    - [sdl][mipi_spi] Respect clipping when drawing :esphomepr:`9722` by :ghuser:`JonasB2497`
+    - [esp32_touch] Fix setup mode in v1 driver :esphomepr:`9725` by :ghuser:`swoboda1337`
+    - [tuya] Update use of fan_schema :esphomepr:`9762` by :ghuser:`jesserockz`
+    - [config_validation] Add support for suggesting alternate component/platform :esphomepr:`9757` by :ghuser:`kbx81`
+    - [core] Process pending loop enables during setup blocking phase :esphomepr:`9787` by :ghuser:`bdraco`
+    - [fastled_clockless, fastled_spi] Add suggested alternate when using IDF :esphomepr:`9784` by :ghuser:`kbx81`
+    - [neopixelbus] Add suggested alternate when using IDF :esphomepr:`9783` by :ghuser:`kbx81`
+    - [bme680_bsec] Add suggested alternate when using IDF :esphomepr:`9785` by :ghuser:`kbx81`
+
+
 Full list of changes
 --------------------
 

components/binary_sensor/gpio.rst

@@ -39,13 +39,22 @@ efficient state change detection with minimal CPU usage.
         name: "Legacy Sensor"
         use_interrupt: false  # Use polling instead of interrupts
 
+    # Example with shared pin (automatic polling mode)
+    binary_sensor:
+      - platform: gpio
+        pin:
+          number: GPIO15
+          allow_other_uses: true  # Pin is shared with other components
+        name: "Pump Status"
+        # Interrupts will be automatically disabled for compatibility
+
 Configuration variables:
 ------------------------
 
 - **pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin to monitor.
 - **use_interrupt** (*Optional*, boolean): Use hardware interrupts instead of polling for better 
-  performance and lower CPU usage. Defaults to ``true`` for most platforms, but defaults to ``false`` 
-  for LibreTiny-based platforms (BK72xx, RTL87xx, LN882x) due to hardware limitations. Only supported 
+  performance and lower CPU usage. Defaults to ``true`` for most platforms, but defaults to ``false``
+  for LibreTiny-based platforms (BK72xx, RTL87xx, LN882x) due to hardware limitations. Only supported
   on internal GPIO pins.
 - **interrupt_type** (*Optional*, string): The type of interrupt to use. One of:
 
@@ -78,13 +87,20 @@ The GPIO binary sensor supports two modes of operation:
 
 .. note::
 
-    Interrupt mode is only available on internal GPIO pins. External GPIO 
+    Interrupt mode is only available on internal GPIO pins. External GPIO
     expanders (like PCF8574) will automatically fall back to polling mode.
 
-    LibreTiny-based platforms (BK72xx, RTL87xx, LN882x) default to polling mode 
-    due to hardware limitations with edge interrupts. You can explicitly enable 
+    LibreTiny-based platforms (BK72xx, RTL87xx, LN882x) default to polling mode
+    due to hardware limitations with edge interrupts. You can explicitly enable
     interrupt mode if needed, but it may not work reliably on all pins.
 
+.. note::
+
+    When a pin is configured with ``allow_other_uses: true`` (for sharing with
+    other components), interrupts are automatically disabled to prevent conflicts.
+    This ensures compatibility with components like ``duty_cycle`` sensors that
+    need to monitor pin state changes. The sensor will use polling mode instead.
+
 Activating internal pullups
 ---------------------------
 

conf.py

@@ -73,7 +73,7 @@
 # The short X.Y version.
 version = "2025.7"
 # The full version, including alpha/beta/rc tags.
-release = "2025.7.2"
+release = "2025.7.3"
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.

guides/supporters.rst

@@ -662,6 +662,7 @@ Contributors
 - `Fabian Affolter (@fabaff) <https://github.com/fabaff>`__
 - `Fabian (@Fabian-Schmidt) <https://github.com/Fabian-Schmidt>`__
 - `Fabian Muehlberger (@fabianmuehlberger) <https://github.com/fabianmuehlberger>`__
+- `Fabiano Arruda (@fabianoarruda) <https://github.com/fabianoarruda>`__
 - `Federico Ariel Castagnini (@facastagnini) <https://github.com/facastagnini>`__
 - `C W (@fake-name) <https://github.com/fake-name>`__
 - `Kouvaris Theofanis (@faniskou) <https://github.com/faniskou>`__
@@ -1994,6 +1995,7 @@ Contributors
 - `TJ Horner (@tjhorner) <https://github.com/tjhorner>`__
 - `Theodore Ni (@tjni) <https://github.com/tjni>`__
 - `Max Efremov (@Tmin10) <https://github.com/Tmin10>`__
+- `tmpeh (@tmpeh) <https://github.com/tmpeh>`__
 - `Christian (@Tntdruid) <https://github.com/Tntdruid>`__
 - `Lars R. (@TNTLarsn) <https://github.com/TNTLarsn>`__
 - `Snōwball (@tobias-) <https://github.com/tobias->`__
@@ -2185,4 +2187,4 @@ Contributors
 - `Christian Zufferey (@zuzu59) <https://github.com/zuzu59>`__
 - `Zynth-dev (@Zynth-dev) <https://github.com/Zynth-dev>`__
 
-*This page was last updated July 19, 2025.*
+*This page was last updated July 23, 2025.*