🩹 Misc. changes from ProUI / ExtUI updates (MarlinFirmware#26928)

Author: thinkyhead

Marlin/src/feature/leds/printer_event_leds.h

@@ -56,7 +56,7 @@ class PrinterEventLEDs {
 
   #if HAS_TEMP_HOTEND || HAS_HEATED_BED || HAS_HEATED_CHAMBER
     static void onHeatingDone()             { leds.set_white(); }
-    static void onPidTuningDone(LEDColor c) { leds.set_color(c); }
+    static void onPIDTuningDone(LEDColor c) { leds.set_color(c); }
   #endif
 
   #if HAS_MEDIA

Marlin/src/feature/pause.h

@@ -52,10 +52,14 @@ enum PauseMessage : char {
   PAUSE_MESSAGE_RESUME,
   PAUSE_MESSAGE_HEAT,
   PAUSE_MESSAGE_HEATING,
-  PAUSE_MESSAGE_STATUS
+  PAUSE_MESSAGE_STATUS,
+  PAUSE_MESSAGE_COUNT
 };
 
 #if M600_PURGE_MORE_RESUMABLE
+  /**
+   * Input methods can Purge More, Resume, or request input
+   */
   enum PauseMenuResponse : char {
     PAUSE_RESPONSE_WAIT_FOR,
     PAUSE_RESPONSE_EXTRUDE_MORE,

Marlin/src/gcode/temp/M303.cpp

@@ -68,7 +68,7 @@ void GcodeSuite::M303() {
     default:
       SERIAL_ECHOPGM(STR_PID_AUTOTUNE);
       SERIAL_ECHOLNPGM(STR_PID_BAD_HEATER_ID);
-      TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_BAD_HEATER_ID));
+      TERN_(EXTENSIBLE_UI, ExtUI::onPIDTuning(ExtUI::result_t::PID_BAD_HEATER_ID));
       TERN_(PROUI_PID_TUNE, dwinPidTuning(PID_BAD_HEATER_ID));
       return;
   }

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -886,7 +886,7 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
    * If STATUS_EXPIRE_SECONDS is zero, only the status is shown.
    */
   if (forceUpdate || status_changed()) {
-    TERN_(STATUS_MESSAGE_SCROLLING, ui.status_scroll_offset = 0);
+    TERN_(STATUS_MESSAGE_SCROLLING, ui.reset_status_scroll());
     #if STATUS_EXPIRE_SECONDS
       countdown = !ui.status_message.empty() ? STATUS_EXPIRE_SECONDS : 0;
     #endif

Marlin/src/lcd/e3v2/common/dwin_api.h

@@ -23,6 +23,12 @@
 
 #include "../../../inc/MarlinConfig.h"
 
+//
+// e3v2/common/dwin_api.h
+//
+// Included by: e3v2/*/dwin_lcd.h
+//
+
 #if ENABLED(DWIN_MARLINUI_LANDSCAPE)
   #define DWIN_WIDTH  480
   #define DWIN_HEIGHT 272

Marlin/src/lcd/e3v2/common/dwin_font.h

@@ -21,6 +21,8 @@
  */
 #pragma once
 
+#include <stdint.h>
+
 typedef uint8_t fontid_t;
 
 /**

Marlin/src/lcd/e3v2/creality/dwin.cpp

@@ -1822,8 +1822,6 @@ void MarlinUI::update() {
   dwinHandleScreen(); // Rotary encoder update
 }
 
-void MarlinUI::refresh() { /* Nothing to see here */ }
-
 #if HAS_LCD_BRIGHTNESS
   void MarlinUI::_set_brightness() { dwinLCDBrightness(backlight ? brightness : 0); }
 #endif

Marlin/src/lcd/e3v2/jyersui/dwin.cpp

@@ -5158,6 +5158,7 @@ void MarlinUI::init_lcd() {
 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
   void MarlinUI::pause_show_message(const PauseMessage message, const PauseMode mode/*=PAUSE_MODE_SAME*/, const uint8_t extruder/*=active_extruder*/) {
+    if (mode != PAUSE_MODE_SAME) pause_mode = mode;
     switch (message) {
       case PAUSE_MESSAGE_INSERT:  jyersDWIN.confirmHandler(Popup_FilInsert);  break;
       case PAUSE_MESSAGE_PURGE:

Marlin/src/lcd/e3v2/marlinui/dwin_lcd.h

@@ -76,7 +76,3 @@
 #include "../common/dwin_color.h"
 
 #define Color_Bg_Heading  0x3344  // Static Heading
-
-// Character matrix width x height
-//#define LCD_WIDTH ((DWIN_WIDTH) / 8)
-//#define LCD_HEIGHT ((DWIN_HEIGHT) / 12)

Marlin/src/lcd/e3v2/marlinui/marlinui_dwin.h

@@ -72,6 +72,12 @@ extern dwin_font_t dwin_font;
 #define EXTRA_ROW_HEIGHT 8
 #define MENU_LINE_HEIGHT (MENU_FONT_HEIGHT + EXTRA_ROW_HEIGHT)
 
+// Character matrix width x height based on menu font
+#define LCD_PIXEL_WIDTH  DWIN_WIDTH
+#define LCD_PIXEL_HEIGHT DWIN_HEIGHT
+#define LCD_WIDTH        ((LCD_PIXEL_WIDTH)  / (MENU_FONT_WIDTH))
+#define LCD_HEIGHT       ((LCD_PIXEL_HEIGHT) / (MENU_LINE_HEIGHT))
+
 #if DWIN_FONT_EDIT == font6x12
   #define EDIT_FONT_WIDTH    6
   #define EDIT_FONT_ASCENT  10