[BUG] Pause_Park_Nozzle_Timeout not working

Did you test the latest bugfix-2.1.x code?

Yes, and the problem still exists.

Bug Description

I have enabled PAUSE_PARK_NOZZLE_TIMEOUT to turn off the nozzle on change filament mid print if I'm not near the print. After the time limit, the screen changes to the message "Press button to heat nozzle" but temperature does not decrease over time. If I click the button the change filament continues with the process of loading, because the nozzle is still on temperature.

I tried latest bugfix, and 2.0.9.5 version and the problem still occurs. Otherwise on 2.0.9.3 it works great.

Bug Timeline

2.0.9.5

Expected behavior

I expect the nozzle to turn off for safety.

Actual behavior

It does not turn off the nozzle

Steps to Reproduce

1. Change Filament mid print.
2. Wait for park and filament to unload.
3. Wait to test if the nozzle turn off after the time specified on PAUSE_PARK_NOZZLE_TIMEOUT

Version of Marlin Firmware

2.1.1

Printer model

Creality Ender 3 Pro

Electronics

Stock electronics

Add-ons

No response

Bed Leveling

MBL Manual Bed Leveling

Your Slicer

Prusa Slicer

Host Software

SD Card (headless)

Don't forget to include

• A ZIP file containing your Configuration.h and Configuration_adv.h.

Additional information & file uploads

Configuration Files.zip

video_2022-08-25_01-21-53.mp4

[GMagician]

@tombrazier MPC seems has a issue with it:
float pid_output = power * 254.0f / constants.heater_power + 1.0f;
since pid_output =1 when power=0 due to idle time

While standard PID seems missing this check
you may change:
const float pid_output = hotend_pid[ee].get_pid_output();
to:
const float pid_output = TERN1(HEATER_IDLE_HANDLER, !heater_idle[ee].timed_out) ? hotend_pid[ee].get_pid_output() : 0;
in temperature.cpp file

[paulluby]

I'm having exactly the same problem on two printers.

Hotend stays on, 1st indicated temp is solid and 2nd indicated temp is flashing, both at same value.

As I said two printers, one has BTT SKR V1.3 Board and other has BTT SKR V1.1 Pro board.

Okay with Marlin 2.1 and below, issue only happens for me with Marlin 2.1.1 and Marlin Bugfix 2.1.x

[tombrazier]

Looks like this logic changed for PID in #24389.

MPC is fine. The value returned by get_pid_output_hotend() gets bit shifted to the left. So the value of 1 goes to zero. It's there to make sure that rounding works correctly.

[paulluby]

Looks like this logic changed for PID in #24389.

MPC is fine. The value returned by get_pid_output_hotend() gets bit shifted to the left. So the value of 1 goes to zero. It's there to make sure that rounding works correctly.

So take it its not a quick fix?

[GMagician]

@paulluby are you using MPC or classic PID?

[paulluby]

@paulluby are you using MPC or classic PID?

I use classic PID.

[GMagician]

@paulluby try PR proposed solution if you can

[paulluby]

@paulluby try PR proposed solution if you can

PR?

[GMagician]

Yep you see link above (draft). You may copy temperature.cpp in your marlin folder and recompile

edit:
temperature.zip

copy to marlin/src/module

[paulluby]

Yep you see link above (draft). You may copy temperature.cpp in your marlin folder and recompile

edit: temperature.zip

copy to marlin/src/module

Can do, compiling now :)

[tombrazier]

@paulluby A "PR" is a "pull request" which is a github way of saying "I have made some changes to this project and would like you to include them". @GMagician is asking for his fix to be added to Marlin. When he created the PR it caused an automatic post above saying "GMagician mentioned this issue 1 hour ago". Below that is a link to the PR, which has the changes. I hope that clarifies some of the language above. Took me some time to understand it all when I started with github.

[GMagician]

@paulluby A "PR" is a "pull request" which is a github way of saying "I have made some changes to this project and would like you to include them". @GMagician is asking for his fix to be added to Marlin. When he created the PR it caused an automatic post above saying "GMagician mentioned this issue 1 hour ago". Below that is a link to the PR, which has the changes. I hope that clarifies some of the language above. Took me some time to understand it all when I started with github.

Thanks, I often give this as standard understood but that's not true. My fault

[paulluby]

Cheers, sort of figured it out after a while.

Its on its second attempt compile, have cleared it for a retry, loads of errors listed at last go.

[GMagician]

@paulluby my source file (temperature.cpp) is for latest 2.1 bugfix. It may give errors if you are using an old marlin version, even a 2.1 release version