[BUG] Compile for ESP32 (MKS Tinybee)

[Azrael321]

Did you test the latest bugfix-2.1.x code?

Yes, and the problem still exists.

Bug Description

Current Bugfix is not possible to compile.

.pio/libdeps/mks_tinybee/ESP3DLib/src/espcom.cpp:25:52: fatal error: ../../../../../Marlin/src/HAL/HAL/ESP32/FlushableHardwareSerial.h: No such file or directory compilation terminated. *** [.pio\build\mks_tinybee\lib360\ESP3DLib\espcom.cpp.o] Error 1

There seems to be one /HAL to much in the file path

Bug Timeline

No response

Expected behavior

No response

Actual behavior

No response

Steps to Reproduce

No response

Version of Marlin Firmware

bugfix-2.1.x

Printer model

No response

Electronics

No response

Add-ons

No response

Bed Leveling

None

Your Slicer

None

Host Software

None

Don't forget to include

• A ZIP file containing your Configuration.h and Configuration_adv.h.

Additional information & file uploads

No response

[ellensp]

Issue is with version of ESP3DLib used
Path was changed in Marlin #25743 so the library also needed updating. luc-github/ESP3DLib#68
Both of these have been merged. (ie completed a week ago)

check Marlin/.pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h
if it says #define LIB_VERSION "1.0.11" this is not the latest version of the library should be 1.0.12

delete the directory .cache in .platformio under your user directory
delete .pio directory under Marlin

rebuild, this forces platformio to get the latest version.

[ellensp]

Here is a minimal config that can trigger issue if the library has not updated, since user did not provide one.
Configuration.zip

[santocyber]

here the same issue more or less the same on marlin 2.1.2.1 but here the error is

In file included from .pio/libdeps/mks_tinybee/ESP3DLib/src/command.cpp:21:0:
.pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: /home/luiza/Documents/AMYWORK3D/AIMPRESSORA-GRANA3D/MINI/inc/MarlinConfigPre.h: No such file or directory
compilation terminated.
In file included from .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlib.cpp:27:0:
.pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: /home/luiza/Documents/AMYWORK3D/AIMPRESSORA-GRANA3D/MINI/inc/MarlinConfigPre.h: No such file or directory
compilation terminated.
In file included from .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.cpp:21:0:
.pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: /home/luiza/Documents/AMYWORK3D/AIMPRESSORA-GRANA3D/MINI/inc/MarlinConfigPre.h: No such file or directory
compilation terminated.
*** [.pio/build/mks_tinybee/libcf4/ESP3DLib/command.cpp.o] Error 1
*** [.pio/build/mks_tinybee/libcf4/ESP3DLib/esp3dlib.cpp.o] Error 1
*** [.pio/build/mks_tinybee/libcf4/ESP3DLib/esp3dlibconfig.cpp.o] Error 1

[santocyber]

Issue is with version of ESP3DLib used Path was changed in Marlin #25743 so the library also needed updating. luc-github/ESP3DLib#68 Both of these have been merged. (ie completed a week ago)

check Marlin/.pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h if it says #define LIB_VERSION "1.0.11" this is not the latest version of the library should be 1.0.12

delete the directory .cache in .platformio under your user directory delete .pio directory under Marlin

rebuild, this forces platformio to get the latest version.

i verify my esp3dlibconfig and library is updated

#include MARLIN_PATH(inc/MarlinConfigPre.h)
#undef DISABLED
#undef _BV
//version
#define LIB_VERSION "1.0.12"

[santocyber]

here the same issue more or less the same on marlin 2.1.2.1 but here the error is

In file included from .pio/libdeps/mks_tinybee/ESP3DLib/src/command.cpp:21:0: .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: /home/luiza/Documents/AMYWORK3D/AIMPRESSORA-GRANA3D/MINI/inc/MarlinConfigPre.h: No such file or directory compilation terminated. In file included from .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlib.cpp:27:0: .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: /home/luiza/Documents/AMYWORK3D/AIMPRESSORA-GRANA3D/MINI/inc/MarlinConfigPre.h: No such file or directory compilation terminated. In file included from .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.cpp:21:0: .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: /home/luiza/Documents/AMYWORK3D/AIMPRESSORA-GRANA3D/MINI/inc/MarlinConfigPre.h: No such file or directory compilation terminated. *** [.pio/build/mks_tinybee/libcf4/ESP3DLib/command.cpp.o] Error 1 *** [.pio/build/mks_tinybee/libcf4/ESP3DLib/esp3dlib.cpp.o] Error 1 *** [.pio/build/mks_tinybee/libcf4/ESP3DLib/esp3dlibconfig.cpp.o] Error 1

i found the issue, is folder have a space, when rename the folder without space build is fine thanks

[SeamusCheng]

here the same issue more or less the same on marlin 2.1.2.1 but here the error is
In file included from .pio/libdeps/mks_tinybee/ESP3DLib/src/command.cpp:21:0: .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: /home/luiza/Documents/AMYWORK3D/AIMPRESSORA-GRANA3D/MINI/inc/MarlinConfigPre.h: No such file or directory compilation terminated. In file included from .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlib.cpp:27:0: .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: /home/luiza/Documents/AMYWORK3D/AIMPRESSORA-GRANA3D/MINI/inc/MarlinConfigPre.h: No such file or directory compilation terminated. In file included from .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.cpp:21:0: .pio/libdeps/mks_tinybee/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: /home/luiza/Documents/AMYWORK3D/AIMPRESSORA-GRANA3D/MINI/inc/MarlinConfigPre.h: No such file or directory compilation terminated. *** [.pio/build/mks_tinybee/libcf4/ESP3DLib/command.cpp.o] Error 1 *** [.pio/build/mks_tinybee/libcf4/ESP3DLib/esp3dlib.cpp.o] Error 1 *** [.pio/build/mks_tinybee/libcf4/ESP3DLib/esp3dlibconfig.cpp.o] Error 1

i found the issue, is folder have a space, when rename the folder without space build is fine thanks

I also encountered the same problem. May I ask which folder you mentioned has spaces?

[PanosPetrou]

Make sure your path to the Marlin files (e.g. "C:\Firmware Files\Marlin-Bugfix") doesn't have a folder name that contain spaces. For example in "C:\Firmware Files\Marlin-Bugfix", the folder "Firmware Files" must be renamed because it contains a space.

[SeamusCheng]

I still have the same problem moving it to the root directory of the D drive

[PanosPetrou]

Redownload Marlin and start over

[SeamusCheng]

.pio/libdeps/esp32/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: C:Users12077DesktopMarlinMarlin/src/inc/MarlinConfigPre.h: No such file or directory
compilation terminated.
In file included from .pio/libdeps/esp32/ESP3DLib/src/espcom.cpp:21:0:
.pio/libdeps/esp32/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: C:Users12077DesktopMarlinMarlin/src/inc/MarlinConfigPre.h: No such file or directory
compilation terminated.
In file included from .pio/libdeps/esp32/ESP3DLib/src/esp3dlib.cpp:27:0:
.pio/libdeps/esp32/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: C:Users12077DesktopMarlinMarlin/src/inc/MarlinConfigPre.h: No such file or directory
compilation terminated.
*** [.pio\build\esp32\libe78\ESP3DLib\command.cpp.o] Error 1
In file included from .pio/libdeps/esp32/ESP3DLib/src/esp3dlibconfig.cpp:21:0:
.pio/libdeps/esp32/ESP3DLib/src/esp3dlibconfig.h:45:44: fatal error: C:Users12077DesktopMarlinMarlin/src/inc/MarlinConfigPre.h: No such file or directory
compilation terminated.
*** [.pio\build\esp32\libe78\ESP3DLib\esp3dlib.cpp.o] Error 1
*** [.pio\build\esp32\libe78\ESP3DLib\espcom.cpp.o] Error 1
*** [.pio\build\esp32\libe78\ESP3DLib\esp3dlibconfig.cpp.o] Error 1
=============================================================== [FAILED] Took 78.95 seconds ====Re download and recompile the same issue

[SeamusCheng]

[PanosPetrou]

Your path "C:Users12077DesktopMarlinMarlin/src/inc/MarlinConfigPre.h" is missing backslashes, it doesn't seem correct.
Try the following:
Go to C:\ and create a new folder and name it Firmware.
Download the latest Marlin bugfix from https://github.com/MarlinFirmware/Marlin/archive/bugfix-2.1.x.zip
Extract everything into that folder and retry.