Starting.....please wait [BUG]

[Oldskool81]

Did you test the latest release build?

Yes, and the problem still exists.

Bug Description

Installed latest firmware and Voxi red DWIN. Aquila_GD32_MM-ProUI-EX-MPC-05-13 screen is stuck on Starting......Please wait. will not boot.

Printer Model

Voxelab Aquila

Model Type

Aquila

Your Mainboard

Aquila GD32

Other Mainboard Type

No response

Add-ons that could be involved

No response

ProUI?

ProUI

Bed Leveling

MM - Manual Mesh Bed Leveling

Did you include your own configuration files?

• A ZIP file containing your Configuration.h and Configuration_adv.h.

Additional information & file uploads

No response

[classicrocker883]

im pretty sure I know exactly what the cause of this issue is. I will post a new release soon. thanks for pointing this out

[classicrocker883]

Aquila_GD32_MM-ProUI-EX-MPC.zip

I made a quick firmware file you can try flashing and see if that works

[Oldskool81]

That worked great thank you so much!!!! Can I ask what it was that was causing the issue? Thanks again for all that you do!!!

…

________________________________ From: Andrew ***@***.***> Sent: Thursday, May 16, 2024 7:33 AM To: classicrocker883/MRiscoCProUI ***@***.***> Cc: Oldskool81 ***@***.***>; Author ***@***.***> Subject: Re: [classicrocker883/MRiscoCProUI] Starting.....please wait [BUG] (Issue #135) Aquila_GD32_MM-ProUI-EX-MPC.zip<https://github.com/classicrocker883/MRiscoCProUI/files/15334424/Aquila_GD32_MM-ProUI-EX-MPC.zip> I made a quick firmware file you can try flashing and see if that works — Reply to this email directly, view it on GitHub<#135 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BBXH7ZNMVH5ZVEW22U4AQIDZCSKRZAVCNFSM6AAAAABHVDVO66VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJUHE4DIMBQGM>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[classicrocker883]

That worked great thank you so much!!!! Can I ask what it was that was causing the issue? Thanks again for all that you do!!!

I had updated the settings.cpp file so that it saved memory so more features could be added to some versions. I tested the firmware using a probe so I figured it should be all good. some variables act as place holders in the EEPROM, I just reverted a couple changes I made.

Marlin just updated with a few more file changes, like this ⚡️ Fix motion smoothness
So, I'll be uploading a revised release, lookout for that soon.

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.