Settled

Connect IQ datafield for saving the state of a headlight/taillight, like Varia™ RTL515 or Varia™ UT800.

Set different light modes per timerstatus:

• (Activity) Timer off
• Timer stopped
• Timer paused
• Timer on

Simulate brakelight, the backlight will flash / shine brighter when speed is slowing.

Settings

Settings are on device.

• Display: what information is shown on datafield
• Head light: set mode based on timerstatus.
• Tail light: set mode based on timerstatus.
• Other light: set mode based on timerstatus.
• Night modes: different modes during night time
  • Enable for head light
  • Enable for tail light
  • Enable for other light
  • Start before/after x seconds: Example turn night mode on 120 seconds before actual night time.
  • Head light: set mode based on timerstatus.
  • Tail light: set mode based on timerstatus.
  • Other light: set mode based on timerstatus.

Display

• Show connected lights
• Show derailleur index/size

Light modes

Set light modes for a head light, tail light or other light.

Default values are:

• Timer off : light off
• Timer stopped : light off
• Timer paused: slow flash
• Timer on: fast flash Option to set different mode after timer paused for x seconds.

Note, after connected to the lights, only the allowed modes are selectable.

Brake light

When speed goes slower turn backlight on with specified light mode. Current example:

• when speed slowing 3%-10% show brigher backlight
• when speed slowing above 10% show fast flash backlight

This can be in combination of backlight for TimerOn is on 20% or turned off.

When enabled:

• Minimal speed: when brake light is active.

• Speed slower: percentage difference between current and previous speed (1 second interval). Ex: 3%;

• Mode: define the tail lightmode. Ex: 40%

• Speed slowest: percentage difference between current and previous speed (1 second interval). Ex: 10% (brake more)

• Mode: define the tail lightmode. Ex: Fast flash

Radar

Enable the radar setting to fix the issue when the backlight is turned off (but radar still working). When a car is detected there is no flashing of the backlight.

When enabled, it will fast flash (or other mode you want) when a car is detected.

• Only first detected: when enabled will flash only 1 time when a new car is detected. When disabled will flash while cars are detected.
• Only when activity: when enabled will only flash when timer is on (activty is on).