h96 needs to use the mainline-uboot when using the 6.1 kernel

[HelferP]

Standard chat template, no routine, no chat.
标准聊天模板，无套路不聊天。

Device Information | 设备信息

• SOC: S095x3
• Mode h96max x3

**Armbian Version

• Kernel Version: 6.1.22
• Release: last jammy https://github.com/ophub/amlogic-s9xxx-armbian/releases/download/Armbian_jammy_04.05.1035/Armbian_23.05.0_amlogic_s905x3_jammy_6.1.22_server_2023.04.05.img.gz

The version mentioned above runs and works normally from an SD card. However, if you install it on an MMC using Armbian-install, after rebooting, the screen goes black and nothing happens. At the same time, version 5.15.105 works perfectly fine when installed on an MMC.

For my board, I choose the 503 installation option. The installation process completes without errors.

If I update the kernel on a working system with version 5.15.105 installed on MMC using 'armbian-update -k 6.1.22', after rebooting, I also get only a black screen.

Attempts to restore kernel 5.15.105 by booting from an SD card and applying the 'armbian-update -s' command do not fix the black screen. The only solution that helps is a new installation using 'armbian-install'

[HelferP]

I booted from an SD card and mounted not working, after armbian-install, system on eMMC to the /mnt directory. Here's the output
cat /mnt/boot/uEnv.txt
cat /mnt//etc/ophub-release
ls -l /mnt//boot/u-boot*

cat /mnt/boot/uEnv.txt
LINUX=/zImage
INITRD=/uInitrd
FDT=/dtb/amlogic/meson-sm1-h96-max-x3.dtb
APPEND=root=UUID=f0b5da45-c30c-4052-a6d0-95ca56dc424a rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1

cat /mnt/etc/ophub-release
PLATFORM='amlogic'
VERSION_CODEID='ubuntu'
VERSION_CODENAME='jammy'
FAMILY='meson-sm1'
BOARD='s905x3'
SOC='s905x3'
FDTFILE='meson-sm1-h96-max-x3.dtb'
KERNEL_REPO='ophub/kernel'
KERNEL_TAGS='stable'
KERNEL_VERSION='6.1.22'
KERNEL_BACKUP='yes'
GITHUB_CDN=''
BOOT_CONF='uEnv.conf'
ROOTFS_TYPE='ext4'
DISK_TYPE='emmc'
AMPART_STATUS='yes'
MLUBOOT_STATUS='no'
MAINLINE_UBOOT='/usr/lib/u-boot/h96maxx3-u-boot.bin.sd.bin'
BOOTLOADER_IMG='/usr/lib/u-boot/'
UBOOT_OVERLOAD='u-boot-x96maxplus.bin'
PACKAGED_DATE='2023-04-05'

ls -l /mnt/boot/u-boot*
-rwxr-xr-x 1 root root 704408 Apr  6  2023 /mnt//boot/u-boot-e900v22c.bin
-rwxr-xr-x 1 root root 746678 Apr  6  2023 /mnt//boot/u-boot.emmc
-rwxr-xr-x 1 root root 746678 Apr  6  2023 /mnt//boot/u-boot.ext
-rwxr-xr-x 1 root root 757153 Apr  6  2023 /mnt//boot/u-boot-gtking.bin
-rwxr-xr-x 1 root root 757080 Apr  6  2023 /mnt//boot/u-boot-gtkingpro.bin
-rwxr-xr-x 1 root root 735459 Apr  6  2023 /mnt//boot/u-boot-gtkingpro-rev-a.bin
-rwxr-xr-x 1 root root 702771 Apr  6  2023 /mnt//boot/u-boot-n1.bin
-rwxr-xr-x 1 root root 761012 Apr  6  2023 /mnt//boot/u-boot-odroid-n2.bin
-rwxr-xr-x 1 root root 553489 Apr  6  2023 /mnt//boot/u-boot-p201.bin
-rwxr-xr-x 1 root root 606670 Apr  6  2023 /mnt//boot/u-boot-p212.bin
-rwxr-xr-x 1 root root 633376 Apr  6  2023 /mnt//boot/u-boot-r3300l.bin
-rwxr-xr-x 1 root root 609247 Apr  6  2023 /mnt//boot/u-boot-s905.bin
-rwxr-xr-x 1 root root 740080 Apr  6  2023 /mnt//boot/u-boot-s905x2-s922.bin
-rwxr-xr-x 1 root root 650183 Apr  6  2023 /mnt//boot/u-boot-s905x-s912.bin
-rwxr-xr-x 1 root root 746678 Apr  6  2023 /mnt//boot/u-boot.sd
-rwxr-xr-x 1 root root 754378 Apr  6  2023 /mnt//boot/u-boot-sei510.bin
-rwxr-xr-x 1 root root 754384 Apr  6  2023 /mnt//boot/u-boot-sei610.bin
-rwxr-xr-x 1 root root 880672 Apr  6  2023 /mnt//boot/u-boot-skyworth-lb2004.bin
-rwxr-xr-x 1 root root 758664 Apr  6  2023 /mnt//boot/u-boot-tx3-bz.bin
-rwxr-xr-x 1 root root 759112 Apr  6  2023 /mnt//boot/u-boot-tx3-qz.bin
-rwxr-xr-x 1 root root 694755 Apr  6  2023 /mnt//boot/u-boot-u200.bin
-rwxr-xr-x 1 root root 877080 Apr  6  2023 /mnt//boot/u-boot-ugoos-x3.bin
-rwxr-xr-x 1 root root 709768 Apr  6  2023 /mnt//boot/u-boot.usb
-rwxr-xr-x 1 root root 748175 Apr  6  2023 /mnt//boot/u-boot-x96max.bin
-rwxr-xr-x 1 root root 746678 Apr  6  2023 /mnt//boot/u-boot-x96maxplus.bin
-rwxr-xr-x 1 root root 703444 Apr  6  2023 /mnt//boot/u-boot-zyxq.bin

[ophub]

9131418

Execute the armbian-sync command in SD to update the armbian-update script to the latest version.

The difference between using the 6.1 kernel and the 5.15 kernel is the addition of /boot/u-boot.emmc files in 6.1.

I just updated the kernel rescue plan, and the new script will delete the u-boo.emmc file in EMMC when executing the armbian-update -s command.

In general, you do not need to use the mainline_u-boot to use the 6.1 kernel normally. If your device fails the test, you should enable the mainline during installation.

https://github.com/ophub/amlogic-s9xxx-armbian/tree/main/build-armbian/documents#123-how-to-restore-the-original-android-tv-system
see 12.3

If you have the Android firmware of the original device and understand how to restore the Android system after installation failure, you can test using the main line for installation: armbian-install -m yes

[HelferP]

If your device fails the test, you should enable the mainline during installation.

What test are you referring to? Could you please provide more details as I didn't quite understand your previous message.

[ophub]

armbian-install -m yes

[HelferP]

Execute the armbian-sync command in SD to update the armbian-update script to the latest version.

Thanks! After armbian-sync armbian-update -s great work, the kernel was successfully updated to version 5.15.105.

[HelferP]

armbian-install -m yes

I tried to install using "armbian-install -m yes" on the 6.1.22 kernel and it worked, although now the system boots slightly differently. Do I now need to always use "armbian-install -m yes" for installation, including for the 5.15.x kernel?

How to update the kernel, which command to use: armbian-update -m yes?

[ophub]

It is not required to install 5.15, only 6.1 is required -m yes for some devices. 99% of devices do not need 6.1, you are an example.

Updating the kernel made no difference. Both are armbian-update, both update 5.15 and 6.1 are fine. As long as the mainline u-boot has been used during installation, -m yes is not needed when updating the kernel.

# update to latest version
armbian-update

# OR Update to the specified version
armbian-update -k x.x.xxx

[HelferP]

Can you explain why 6.1.22 works fine with SD, but does not work with regular installation to emmc using the armbian-install command?

[ophub]

your box need mainline uboot.

99% of devices do not need, but you are 1%.

Because this h96 is more handsome. must use -m yes

[HelferP]

your box need mainline uboot.

Can installing mainline uboot cause problems?

[ophub]

If you can use the original Android boot, you don't need the main line. The purpose of writing to the mainline is to solve the problem that Android cannot be booted. Use the mainline to better support the armbian system.

The disadvantage is that for unknown devices, the main line uboot written to other devices during the test will cause failure to start.

[HelferP]

Thank you, my question is closed!