Docker version

[godshades]

Hi, thanks for a great project
Would you mind if make a docker version of this pj
Or tutorial how to use with adguard (docker)

[trinib]

Thanks.. my plan was to make these projects more understandable and get it working, I thought about building a docker container at some point , I know it is super easy but for a while I'm focus on my app development and not planning to make one now for there is a lot of guides on docker and these projects.

But the whole idea of this repo was for people to understand this network stuff better and other people to contribute to make it better so I will create a help issue for a docker image if anyone is interested. 🙏🙏🙏

[oijkn]

Thanks to your great work I was able to set up a Docker with all the stuff except the VPN. It is installed on my raspberry via the PiVPN script. I'm going to continue an observation phase to see if everything works well and I'll publish my Docker.

[oijkn]

In my case I don't need to use a VPN in a docker. So at first I will share my work without this option. On the other hand I use OpenVPN because with a PC that does not have administrator rights it works while with Wireguard it is not the case even if it is faster.

[oijkn]

Hi @trinib,

Sorry for the wait but I was busy with other personal projects.
Good news ! The Docker version is online and available here : https://hub.docker.com/r/oijkn/adguardhome-doh-dot

If you have any comments or questions don't hesitate to open an issue or to contact me.

Thanks again for your great work and sharing :)

[trinib]

@oijkn thanks I'll try it out in a while

[Monirzadeh]

Hi @trinib,

Sorry for the wait but I was busy with other personal projects. Good news ! The Docker version is online and available here : https://hub.docker.com/r/oijkn/adguardhome-doh-dot

If you have any comments or questions don't hesitate to open an issue or to contact me.

Thanks again for your great work and sharing :)

hi @oijkn
i try to deploy that but i get in trouble
for now i have my macvlan with name 'mymacvlanexist' how should i connect that to that 'mymacvlanexist' instead of create new one?

i think i should change this two part to connect network to 'mymacvlanexist' , but i don't know how.

    networks:
      macvlan0:
        ipv4_address: 192.168.1.110                                    # IP of the container for AdGuardHome, configure it to your needs

and

networks:
  macvlan0:
    driver: macvlan
    driver_opts:
      parent: eth0                                                     # Parent interface, configure it depending on your interface name
    ipam:
      config:
        - subnet: 192.168.1.0/24                                       # Subnet of the container
          gateway: 192.168.1.1                                         # Gateway of the network
          ip_range: 192.168.1.100/28                                   # Usable Host IP Range: 192.168.1.97 - 192.168.1.110
          aux_addresses:
            rpi-srv: 192.168.1.100                                     # Reserved for RPi Server (IP of the host)

[oijkn]

@Monirzadeh can you list your network with : docker network ls and then show me detail with docker network inspect <network_name> ?